Performance Automotive

Archive for the ‘automotive parts’ Category

As any mechanic knows, the ability to offer a comprehensive service to customers, being able to offer repairs and care for all aspects of a motor vehicle maintenance program is key to being able to retain customers. Air Conditioning is more or less standard across all models these days, and while in the past, AC maintenance was a highly skilled and niche market, it is now an essential side of the business and key to any workshop’s continued success.

In order to ensure that refrigerant is recovered properly from a car’s air conditioning system during servicing, a workshop must use an automotive AC machine. These devices prevent the release through venting of CFC gases. EPA guidelines require that when a car is being serviced, the Freon, or CFC12 that is used as the coolant should be collected and recycled in order that it is not released into the environment where it can potentially damage the ozone layer.

The refrigerant used in most motor vehicle air conditioning systems is based on chlorofluorocarbons, which have been linked with causing damage to the ozone layer, and as such, the control of these substances is of particular concern to the environmental protection agency. Whenever a car air conditioning system undergoes maintenance, proper care must be taken to protect the environment from the release of CFCs, and this is best done by using automotive AC Machines.

By reusing Freon gas rather than allowing it to be vented into the atmosphere, the environment is protected. However, when the refrigerant is collected from a car’s air conditioning it can be contaminated with water, oil and any of the other liquids that are used in cars. By using automotive AC machines, it is possible to process the refrigerant and remove any of the other fluids from it, allowing it to be reused, either in the same system as it has been drained from, or alternatively, in another car altogether.

There are a whole range of different refrigerant recovery machines on the market to suit all types of workshop, from small operations through to large commercial garages that deal with many different types of car, and need to be able to offer a complete service to clients.

Choosing the right automotive AC machines for your needs can be a daunting task, and too many people simply opt for the cheapest model available, rather than making an informed decision about the best product for their needs. EPA requirements aside, the most important factor when choosing the correct automotive AC machine for your business, is the capacity of the machine to deal with the range of vehicles that you currently work on. You need to choose a machine that can connect easily with all the different types of car that your workshop deals with, and which has enough capacity to recover and treat the refrigerant left in the system to remove any impurities.

Basic automotive AC machines such as the Pro Set Oiless Portable Recovery Recycle Unit are flexible enough to reprocess coolant from a fairly wide range of sources, remove any contaminating oils and other liquids, and release the Freon in perfect condition for reuse.

There are other machines in a similar price bracket that are reliable enough for every day use, and yet still compact enough not to require a vast amount of space in your workshop. Automotive AC Machines such as the Inficon Vortex refrigerant recovery machine are ideally suited to occasional use, and are very compact.

If offering AC repairs and servicing is key to your business, then having the right tools for the job is essential. Getting it right at the beginning when you choose an AC coolant recovery machine often means choosing a model from the Cool Tech range. These robust and highly regarded specialist tools are at the centre of any serious AC shop, and thanks to their efficiency and great value for money, will pay for themselves over and over again.

Thanks to the increasing complexity of modern automobiles over the past few years, most professional auto shops and garages now require a selection of automotive scan tools with which to carry out day to day diagnostic work in order to pinpoint any problems with an engine or engine management system in order to discover what action is needed in order to effect a repair with the minimum of error and maximum efficiency.

There are a variety of different tools available to carry out diagnostics and scans on different types of car and to prepare to repair as effectively as possible. Knowing in detail what issues are causing a car engine to behave in a particular manner is the key to being able to correct the fault in a timely and effective manner.

Perhaps the best known manufacturer of automotive scan tools is OTC, who make a range of tools designed for the highest quality and best price. A comprehensive range is available to enable mechanics to be able to tackle any job they come across, and the range of OTC automotive scan tools is recognized as one of the top choices for the professional, as well as being affordable enough for domestic use under certain circumstances.

Different jobs require different tools, and some are more complex than others. Typically, any job to repair a modern car begins with plugging the scanner into the engine management computer and downloading a log of current performance date. This will include fuel consumption, and time since the last service. It will give the mechanic a complete overview of how the engine is operating, and where there might be errors occurring. The scan will show the mechanic examining the engine whether there are any problems with the fuel supply, the electronics, the air filters, and the running temperature, it will also provide plenty of insight into whether any problems are related to an issue within the engine itself, or indeed within the way the management system has been set up.

A complete diagnostic of a car’s engine management computer system will typically offer an almost immediate list of the performance details for the vehicle, and a good automotive scan tool will shave hours off an otherwise lengthy repair task, as the mechanic will be able to tell almost immediately what is wrong, and what needs to be done in order to repair the damage.

Of course, technology only works well in the hands of those who understand it, and are able to sift through the data provided through a scan and interpret it correctly. However, the latest OTC automotive scan tools have been designed to be almost fool proof, and are able to draw on the experience and insight of hundreds of different programmers and mechanic’s personal records in order to provide a more accurate overview of the data and even present possible solutions to many of the most common problems that a mechanic might encounter.

While some manufacturers release their own range of tools, that are aimed at main dealers, a commercial mechanic may deal with many different models and manufacturers in their day to day role, and this is why it is often an idea to purchase OTC automotive scan tools, as they will be compatible with a range of different vehicles from different international makers, and therefore offer greater flexibility without having to compromise on quality or pay repeatedly for scanners for every single car that is on the market.

While commercial level automotive scan tools are expensive to install and themselves require regular system updates that carry the latest settings for every new vehicle released, they pay for themselves almost immediately thanks to the time that they are able to save, and the fact that without them, even the most experienced mechanic would struggle to discover the inner workings of the latest car engines, which have been designed to be efficient, and robust, but are increasingly too complex for anyone but the experts to consider carrying out any work on.

Need to sort through a stack of invoices on your desk? Is it hard to keep track of work orders and client history? The use of automotive shop management software will help alleviate all issues and save you time and money in the process. You will no longer loose out on business because of disorganization.

Whether it is to organize the office or keep better track of materials this automotive shop management software will get any shop back on task; the repair of vehicles and not the organization of the office.

Spend less time on paper work and spend more time with clients. Increase the bottom line with this time saving software. It is certain that satisfaction will be rendered with the purchase of this software.

Time is of the essence and with the use of this automotive shop management software hours a day will be saved. This program is equipped to automatically convert scheduled appointment or estimates into work orders, ultimately saving time and an increase in profits. There is also a time saving ‘service’ (Canned Jobs) built in automatically to save the client time.

This product offers many levels of functionality for an easy upgrade to management and budget needs. These levels of functionality include scheduling, invoicing, receivables and many other features. Online ordering is also available with labor guides to create ease when ordering parts.

With the purchase of this automotive shop management software a great support team will be provided that will be there to meet you software needs. Support is included in the price for the first year of every package bought to ensure satisfaction with every purchase. No matter what the technical problem, the support team will be able to help in a way that is fast and efficient.

Our product offers multi levels of functionality for an easy upgrade for management and budget needs. These levels of functionality include scheduling, invoicing, receivables and many other features. We also offer online parts ordering with labor guides, and other features to create ease when ordering parts and managing your shop labor.

This software is designed to be simple and smooth, while it includes the functionality to meet the needs of the automotive repair shop industry. This specific product provides ease of use and has received high acclaim from both light and heavy duty vehicle repair businesses.

While most businesses have to purchase multiple types of software in order to effectively run their companies, this software gives businesses everything they need in one package. That saves them time, as well as ease of use. By only having to learn one program instead of several, businesses are able to quickly master the features.

Shop Controller provides comfort with the purchase of our software. We hope you will visit http://www.shopcontroller.com or call us at 800.898.2038. With countless hours of research and development, rest assured that this software is capable and will meet the needs of any automotive repair business. From work orders to online orders and everything in-between, this software system has everything an automotive business needs.